Why pick CK-200 crucial programmer:

Why opt for CK-200 essential programmer

1. Latest Software program Version: CK-200 V38.03

2. No Token Limitation

three. Updated version of CK-100 Important programmer, New generation Car Locksmith Tools.

four. Add a lot more vehicle models in autonumen CK-200 Auto crucial programmer



If you think that, simply because your applying a Tech 2 for the personal use, you'll be able to get a less expensive import unit, believe once more! I see Numerous these units thrown around the scrap heap just about every year. They can not be repaired and are non-serviceable. Not all of these units will accept GM programing, therefore can not be updated. They're of grossly inferior high-quality and have an extraordinary failure price, and harm a lot more vehicles than I can express to you.



The Tech two scan tool or Tech2Win application could be utilised for diagnosing 2013 model year and earlier GM autos. The International Diagnostic Technique 2 (GDS 2) will likely be the only diagnostic tool for diagnosing autos for 2014 model year and beyond authored by GM.



If an issue is identified with the Tech 2 gm scanner software immediately after December 2012, the situation might be evaluated as well as a decision will likely be made regardless of whether to author new Tech 2 software or to author the vehicle(s) in question in GDS two. If the repair is implemented within the Tech 2 application, there will be a special, unscheduled release in the software program through TIS2Web.

How to load application on Tech2 scan tool 32GB card?

There is application which can reprogram the 32MB PCMCIA card inside the GM Tech2 diagnostic scanner by means of serial cable with bin files. Here gathering some download resources in the Tech II PCMCIA bin file with multi-language and versions. as follow is The best way to load computer software on Tech2 scan tool 32GB card?



Insert tech2 card into pcmcia port on laptop and use mce to create the essential bin to card, once done take away card and place in tech two and power on.Tech2 card writer is one particular of them however the approach is a great deal slower then reprogramming in pcmcia slot. gm tech 2 scanner card writer might be downloaded absolutely free under at the same time.


gm tech2 scan tool is utilised on obd2 GM cars which primarily built from 1992 to 2011, while GM MDI supports cars from 1990 as much as 2013. Now every single automobile for now on might be making use of GDS with all the MDI that's why we said MDI is replacing the tech 2. Even so, Tech2 performs with rather effectively with some SAAB vehicles on account of its SAAB card, even though some SAAB owners said MDI not help their automobiles.

Launch creader viii update and Registration manaul

Step 1: visit http://mycar.x431.com/pad/landingPageIndexCrv.action and click icon "Update Tool Download".
Step 2: Download and install "Launch Creader Update Tool ", after installation is complete, run it.
Step 3: in the following picture, select Language (English, Chinese, French and Spanish available) and input product Serial Number (the serial number is in the back of Autonumen Launch X431 Creader VIII.
Step 4: click "Update" to enter the registration page, input Email and Register Code, click "Submit".

(Note: if you need Register Code, please refer to step 5 to step 8; if you already have Register Code, after submit, skip to step 9. )

Step 5: the register code can be found in Autonumen Creader VIII, how to find? Connect one end of the USB cable to Launch Creader VIII, and another end to the computer.
Step 6: Wait until Launch Creader enter the main menu, then Move the mouse pointer to the "Help" icon, finally press the "OK button.
Step 7: select "Tool Information", then press button "OK".
Step 8: the register code shown below is the one needed to enter in the step 4. (Back to step 4 to input register code and continue)
Step 9: insert TF card into TF car
Step 9: insert TF card into TF card reader, then insert the TF card into the computer.
Step 10: restart the "Launch Creader Update Tool ", select the file you need or click "All", then click "Download" to start the download.
Step 11: After complete download, take out TF card from TF card reader and insert it into the slot of Creader VIII, then supply power for Autonumen Code reader viii reader 8 by the USB cable (one end of the USB cable connect to Creader VIII and another end to the computer) or by the vehicle diagnostic socket (connect the OBDII connector of Creader VIII to vehicle diagnostic socket ), after the Creader starts, it popup awindow prompting " System Upgrade- Sure Upgrade?", select "OK" to upgrade.
Step 12: update complete!