My using experience with Toyota Intelligent IT2

I use an OBD2 tool, Toyota Intelligent IT2 to pull trouble codes, and troubleshot ignition coil faults and intake air temperature sensor fault. I tried to cleared the fault codes. But the intake air temperature sensor fault just could not be erased. I read the system data flow from the Toyota diagnostic tool and verified there was something wrong with the intake air temperature sensor. Considering that there were black stains in the exhaust pipe, I was afraid that the problem may be caused by bad combustion.

toyota intelligent tester it2 with suzuki usb driver.
The connecting of your TOYOTA Intelligent Tester2:
The main unit of the tester has special internal rechargeable battery. This battery just isn't charged once the tester shipped from your factory. So make certain charged the battery before utilize the tester.
one. Connect the AC/DC adapter DC plug towards the AC/DC adapter connector in the In telligent Tester II.
two. Plug the AC/DC adapter power plug into an electrical socket. battery indicator alterations from red to green.
three.. Disconnect the AC/DC adapter DC plug from the AC/DC adapter connector on the Intelligent Tester II.
four. Unplug the AC/DC adapter power plug from the electrical socket.
NOTEThere may be no really need to turn OFF the power switch around theTOYOTA Tester2 whileTester II could be charged with all the power ON or OFF. It requires approximately 5 hrs to totally charge the ba of regardless of whether the energy switch is ON or OFF.